首頁 > 產品 > BA/CA Series The feature of BA/CA series Unscrew te side panel from rear panel either using screw driver or too-free thrunmb screw. Lockable side panel for increased security. To remove the side panel, push the door latch and swing the door through 90 degrees. Pull out the bith 5.25" plastic & internal metal covers as illustrated. 16 pieces smart screws are provided on the horizontal bar for CD-Rom installation. Fix the smart screws on the both sides if the CD-Rom. Slide the CD-Rom into driver bay unit it clicks into place For quick and easy removal, pull the smart clip upwards and then push the CD-Rom out. Push the rail to release from chassis and pull out. Fix the screwless slide rails to each side of the HDD driver by simply pushing them on. Now push the HDD driver into its bay until it click into place. The Floppy drive can be fixed into the place with the premounted thumb screws. For quick release of the PCI card blanking plates, pull the steel clip outwards.. The front USB port cables are color codes, Black for USB, Yellow for Audio and Blue for 1394. There are 2 x 90 mm fan vents & air air-vent in side panel to maximise CPU & PCI card heat loss.. The optional 90 mm fans on left side panel are secured by fixing rebet snaps or metal screws. The plastic fan tray which can take 3 x 90 mm fans can be removed with one screw. Up the optional 3 x 90 mm fans can be fixed into the fan tray with fixing screws. On the rear panel of chassis is a 1 x 120 mm fan vent position by screwing. The chassis feet can be removed if optional wheels are to be fitted by removing the fixing screws. The optional wheels can be fitted by using two fixing screws on the bottom of the chassis.

© 2000-2005 copyright reserved. 本網任何圖文程式未經同意，不得擅自連結、複製及引用， 網際威龍科技有限公司 ( ServComputing Inc. ) TEL : 台北 (02)23921000    高雄 (07)2810000 sales@servcomputing.com